Guide wire spring tube

In the medical field, wire spring tubes are also widely used, mainly in medical equipment such as endoscopes and pacemakers. Wire spring tubes can transmit signals through conductive wires to help doctors observe the internal condition of patients and diagnose their condition.

For example, an endoscope is a medical device that uses a wire spring tube to transmit signals. Doctors can insert the endoscope into the patient's body, transmit images and video signals through conductive wires, observe the patient's internal situation, and perform diagnosis and treatment.

In addition, guide wire spring tubes can also be used in medical devices such as cardiac pacemakers. Cardiac pacemakers can transmit signals through conductive wires to control the contraction and relaxation of the heart, helping patients maintain normal heart rhythm. The stable transmission characteristics of guide wire spring tubes enable medical devices such as cardiac pacemakers to more accurately control patients' physical conditions and improve treatment effectiveness.

Wire guide spring tube is a device composed of a conductive wire and a spring, widely used in electronic and medical equipment. In electronic devices, it is used to transmit signals or power supplies, maintain stable contact, and ensure stable transmission of signals or power supplies. In the medical field, it can help doctors observe the internal condition of patients and diagnose their condition, such as endoscopes, pacemakers, etc. The stable transmission signal characteristics of the guide wire spring tube enable medical equipment to more accurately control the patient's physical condition, improve treatment effectiveness, and reduce patient pain.

The guide wire is composed of an inner and an outer part, and the outer layer is made of high-quality stainless steel wire wound on a spring spinning machine. The steel wire should be smooth, tough, and elastic, and the winding must be uniform, tight, neatly arranged, and uniformly loose. This type of spring should be able to withstand repeated bending and not break under a certain force.

The cavity in the center of the spring, which is the inner part of the guide wire, is equipped with a continuous and hard steel wire core, and the front end of the steel wire core gradually becomes thinner. Weld the tip of a very slender steel wire core to the end of the spring, then weld the end of the steel wire core to the end of the spring, and polish it smooth to become the simplest guide wire.